This roller is used for texture, render and block work and is an excellent alternative for the sheepskin Long Nap. Some painters use this roller for internal walls too. An excellent 21 mm very durableand strong fabric with an amazing finish and a wide range of applications. This roller is still available although it is replaced by our Terracotta and Terracotta Green , both 21 mm nap. For texture coatings the Multicolour still seems to be the preferred choice.
The Microstripe blue has a 12 mm microfiber pile and gives a beautiful finish. The fabric is the same as the 9 mm version with the yellow and orange stripe. The 12 mm holds a bit more paint and the finish is slightly less smooth.
Micro fibre fabrics are only to be used for water based paints.
This fabric ( white with blue line) will be replaced by the microfiber blue ( white with speckled blue) which is identical but has a different colour pattern.
White with blue line ( to be replaced over time by the identical Micro fibre blue)
White with speckled blue (identical to the above apart from the colours)
270 mm -11″
360 mm -14″
For a full price list or to become a registered Rolon Customer, please contact us.
270mm Microstripe Blue Roller 12 mm Nap
This fabric will be replaced by the Microfiber Blue fabric below
The high quality Microstripe 2 Green 12 mm with Teflon ™ surface protector is one of the newer fabrics available. It is the first synthetic roller that behaves a little like lambs wool. The secret of this roller is very fine poly-amide coated with Teflon ™ surface protector, specially spun and twisted. In other words: a very nice finish, good coverage, easy to wash out and exceptional absorption and release of paint. The coated poly-amid rollers are strong performers in the market. Only available from ROLON and its retail customers.
These high quality, unrivalled rollers have strong support in the market. An exclusive German produced fabric, made from a continuous poly-amide fibre to reduce lint. Specially twisted during weaving and partly opened up to increase the paint holding capacity. Poly amide is best for water-based paint because it’s affinity to water. Polyester has an affinity to oil based solvents and the special polyester backing of this fabric makes it also suitable for oil-based paints.
Some experienced painters who look after the rollers use the worn-down rollers for glossing doors.
The previous version of this fabric was made from a discontinuous (called stapled) fibre. This version is now available again and has 2 yellow stripes. We realise that some painters prefer the original fabric which seem to have a slightly better productivity due to the lager number of “fibre ends” inside the nap. The materials in both fabrics are identical. Stapled fabrics always need to be used for undercoat first until all loose fibres are removed. They are a logical result of the way the fabric is constructed and produced.
These high quality Gloss Velour Rollers with 4mm nap are the modern high quality alternative to the mohair roller. Work the roller in and you have a lint free roller that gives you an excellent finish. No need to brush off. This roller is a pressure release roller like the mohair type gloss rollers . The backing from our velour roller is cotton. Velour is a woolen fibre and mohair is made from goat hair.
Some painters will still brush the finished surface off with a very soft Purdy Syntox brush, depending on the requirements of the finish. You also could use a 7 mm Royal roller if you want a longer nap.
180 mm -7″
230 mm -9″
270 mm -11″
460 mm -18″
The rollers come in a range of sizes from 180mm to 460mm.